Limestone is a common soft rock, but also the raw material of many soft rock crushing production lines. Today, we will take limestone as an example to explain the configuration of soft rock crushing production line.
Before the crushing sand production line configuration, the first thing is to know the raw materials, such as its size, hardness, humidity, etc., in addition to clear their demand for capacity particle size and type, it will provide necessary scientific basis for the later configuration of suitable type of crusher and sand making machine, such as hard rock using hammer crusher, the direct consequence is the hammer wear, high cost of replacement parts. The disadvantage of soft rock using cone breaking is large equipment investment and late maintenance costs.
Limestone is the trade name for limerock as a mineral raw material. Limerock has been widely used in the history of human civilization because of its wide distribution and easy access in nature. As an important constrction material mining has a long history, in modern industry, limestone is the main raw material of cement, lime and calcium carbide, and also an indispensable flux limestone in metallurgical industry. High quality limestone after ultrafine grinding, is widely used in papermaking, rubber, paint, coating, medicine, cosmetics, feed, sealing, bonding, polishing and other products in the manufacturing.
Proposal of Limestone Production Line
Generally divided into feeding, crushing, screening, transportation, raw materials through the hopper to vibrating feeder and to the crushing equipment for the first coarse crushing, the material by belt conveyor after delivery to the second equipment (fine), the crushed material is transported to the vibrating screen by the belt machine for screening, and the material larger than the required size will be returned to equipment for second crushing again, the final material after the vibrating screen is the finished material. If the grain shape is not good enough, we can install the vertical shaft impact sand making machine at last for shaping, so that the grain shape of the broken material is more rounded.
The sand aggregate production line that we design using electronic control operating system, highly automatic, the whole production line process is simple, easy to operate, no manual operation is required except for power on /off and routine maintenance.
The reasonable configuration of the production line solves the problem of unqualified grain shape of sandstone processed by traditional equipment. The finished product has good quality, uniform particle size, good grain shape and low yield of stone powder, which fully meets the material requirements of highway. In the process design, due to the reasonable matching of all levels of crushing equipment, as well as the rigorous spatial cross layout, so it has the characteristics of small area, high economic benefit, good quality of finished materials, low yield of stone powder. And overcome when the traditional equipment processing hard material wear seriously caused by high production cost shortcomings, large output, high production efficiency, low operating cost, high economic benefits. The equipment configuration of sand stone aggregate production line is mainly designed according to the specifications of stone and the output and use of stone.
